Tips on How to Install a Ceiling Fan Where No Fixture Exists

Are you wondering how to install a ceiling fan where no fixture exists? Because you are not the only person with such curiosity, so do not worry!

Now that a ceiling fan becomes one of the most favorite household items, it is explicable if more people start to be more curious about its installation procedure.

This is particularly true for those who did not plan to install this item in their home previously and have no fixture for it.

To understand how to install a ceiling fan where no fixture exists, this article covers everything necessary for you to know.

Why Installing a Ceiling Fan Is Worthwhile

Before discovering the hassle of installing a ceiling fan, you probably want to make sure that this item is right for your home.

Many people believe that a ceiling fan is one of the most practical electrical inventions today. It offers a lot of advantages for your space.

  • It offers comfort

install a comfortable ceiling fan

You can count on this fan to cool everyone down throughout the hot summers as well as to circulate heat during the cold winters.

However, there is no doubt that many homeowners want to know how to install a ceiling fan where no fixture exists due to its convenience.

  • It diminishes energy consumption

A ceiling fan can boost your comfort while reducing the cost of energy consumption. Besides, it can increase your air-conditioning system’s lifespan by diminishing the strain on it.

  • It adds beauty to your room

install a beautiful ceiling fan

Moreover, you should not overlook its ability to spruce up your room as well. Due to its popularity, a lot of exceptional ceiling fans are available to distinguish your home from others.

Just like this ceiling fan that makes the décor seem more sophisticated.

How to Purchase the Right Ceiling Fan for Your Room

As you can see above, adding a ceiling fan to any home décor can always be a valuable decision. Then, how do you get the right unit in the market?

Before discovering how to install a ceiling fan where no fixture exists in the right way, it is highly crucial to get the best unit for your home.

Use the following tips to find your best ceiling fan at nearby home improvement stores.

Determine the size of your ceiling fan

install a big size ceiling fan

Start with determining the right size of your fan. Keep in mind that a larger room generally requires a bigger unit.

Hence, you should measure the longest wall in your room first. If the measurement shows that the length is no more than 12 ft, this means a 36-inch ceiling fan will be an ideal choice.

However, if the longest wall measure between 12 and 15 ft, you should get a fan that is 42 inches in diameter.

If the measurement is anything over 15 ft, consider buying a 52-inch ceiling fan to cover all the areas.

Consider the style of your fan

Your understanding of how to install a ceiling fan where no fixture exists will be complete if you also know the right unit that suits your home.

When it comes to a ceiling fan, do not forget that its appearance can make a statement in your space too. As a consequence, you should find one that meets the style of your home.

Take the added features into account

installing ceiling fan and add features

Then, consider if you need an added feature like a simple lighting fixture or a unique chandelier to come with the unit.

Indeed, this choice will entirely depend on your taste and budget, so feel free to get the one that you like the most.

How to Install a Ceiling Fan Where No Fixture Exists Correctly

Installing a ceiling fan is generally a straightforward do-it-yourself project if you are confident with basic electrical improvements.

However, if your room does not come with an existing fixture, the project can become harder as cutting through the ceiling and installing a new wiring system will be involved.

If you are ready for the challenge, let us check out the step-by-step to install a ceiling fan without any existing fixtures below.

1. Mind your safety first

safety in installing ceiling fan

The first step on how to install a ceiling fan where no fixture exists should always be switching off the electricity at your breaker box.

Keep in mind that ignoring this vital step may result in electrical fires, electrocution, or even a deadly injury.

Since working with wires can be highly dangerous, getting rid of any electrical currents flowing via the circuit is very important. Make sure to do so before starting your project.

2. Prepare the materials and tools

prepare to install ceiling fan

Secondly, you will need to prepare some tools for executing the project. A hammer, drill or driver, and drywall saw are among the needed items.

To complete the step on how to install a ceiling fan where no fixture exists, you will need a circuit tester, screwdrivers, and wire strippers as well.

When it comes to the materials, do not forget to prepare the fan along with the mounting kit, wall control switch, nails, support brace, and wire nuts.

3. Pick your location

Thirdly, you have to choose an appropriate spot to mount the ceiling fan.

In this step on how to install a ceiling fan where no fixture exists, you should remember that this appliance may fall if installed in an improper position.

Besides, please also note that the fan will typically weigh between 15 and 50 pounds. As a result, you will require a strong joist to secure it.

If your fan is not mounted to the ceiling properly, keep in mind that it may lead to a huge safety risk.

4. Install the electrical box

Once you have selected the location, the next step on how to install a ceiling fan where no fixture exists will be working on the installation of the electrical box.

Simply nail the whole box into the joist if you already find a single one that is strong enough to support the ceiling fan.

However, if you discover two joists, consider getting a saddle and a brace to give the fan some support.

Follow the steps below if you find two joists in the chosen location.

  • Firstly, create a whole in between the two joists,
  • Then, shove a brace of the fan via the hole by using the mounted electrical box,
  • Next, secure the brace by following the manufacturer’s instructions,
  • Lastly, add a saddle over the base of your ceiling fan so that you can run wiring through it.

5. Connect the wires

The next step on how to install a ceiling fan where no fixture exists is to connect the wires.

Depending on the requirement of managing your ceiling fan, the method and the connection of wiring will be different.

Generally, you have to connect the new wires with neutral, hot, and ground wiring systems in the wall switch box.

6. Attach your new ceiling fan

Once you have finished with the installation of the electrical box and have connected the wires in your switch box, you can continue to assemble and mount the ceiling fan.

This step is not different from the general method. You just need to follow the instructions of the manufacturer. After that, switch on your power supply and check if the fan is running correctly or not.

What If the Ceiling Fan Not Working

If you have tested the fan and it is not working properly, contacting a professional electrician should be the first thing to do.

Just make sure you call an experienced technician that will troubleshoot the issue in the right way.

Meanwhile, if you have no experience, working with electricity is pretty dangerous in the first place.

In this view, you probably want to have a professional ceiling fan installation instead of putting yourself at risk. Make sure to have a licensed, certified, and insured electrician that works in your area for this case.

How to Replace a Light Fixture in Your Ceiling Fan

If you decide to have a ceiling fan that comes with a light fixture, knowing how to replace it will be a great investment too.

Different from how to install a ceiling fan where no fixture exists, you will start with a completely dissimilar step since the wiring system is already available.

You can use the following steps as a guide to replace a light fixture in an existing ceiling fan.

1. Turn off the electricity connection

Always start a project that involves wiring by switching off the electricity at your home’s main electrical panel.

Do this particularly to the circuit that powers the lighting fixture that you are working on.

If you are afraid that it may get turned back on unintentionally, consider covering the switch with tape. You can ensure that the power is off by utilizing a circuit tester.

2. Disconnect the light wires

Cut off the wires of your fixture and remove its central mounting nut. Use any screws that hold it in place to do the same.

Unlike how to install a ceiling fan where no fixture exists, you should find out if the electrical box is firmly tied up to a ceiling joist or support bracket.

In case the ceiling box is concealed by any materials like drywall, try to access the joists through the attic.

3. Install a support brace

If there is no access from above, you can install the support brace from below to hold the ceiling box and fan.

Simply remove the current box and slot in the brace up via the hole. Then, secure it in place by ratcheting the system in position.

For those who have access to work above the ceiling, it is possible to install the support brace with 2×4 lumber nails. Attach them to the joists of the box position.

Make sure to put the brace directly above your ceiling box and utilize screws to mount it securely from below too.

4. Set up the fan mounting bracket

installing ceiling fan mountain bracket

Knowing how to install a ceiling fan with no fixture exists may let you know that most ceiling fan units feature a mounting bracket.

However, if yours does not come with one, you can purchase it individually. This bracket mostly features a circular vessel installed on its extension rod or the fan motor.

Once in hand, mount the bracket to the ceiling box by following the instructions from the manufacturer.

5. Connect the fan motor wiring

Different from how to install a ceiling fan where no fixture exists, replacing the lighting that comes with it will require fan motor mounting.

You can insert the swivel ball into the ceiling bracket to attach the fan motor. Then, connect it to the house wiring.

Watch out for extra wires or a receiving unit that may be included in your ceiling fan’s installation. Do not forget to follow the manufacturer’s wiring instructions to make sure that everything is alright.

6. Attach the light fixture

Mount the light fixture to the fan motor assembly and fix the wiring by following the manufacturer’s guidelines. Remember to reinstall the glass dome or any decorative light shade along with the bulbs.

Tips Related to Ceiling Fan Installation

tips to install ceiling fan

You already know how to install a ceiling fan where no fixture exists as well as the way to replace its lighting system if any.

To complete your understanding of this issue, there are some tips related to ceiling fan installation that you better know.

Do the project during the day

If it is your first time to follow how to install a ceiling fan where no fixture exists, the project may take more than an hour from start to finish.

Give yourself minimally three hours to get the installation done. It is also recommended to install your ceiling fan during the day since you have to switch off the power in the room throughout the process.

Ask a family member for help

You should not work alone to do this project since you will need someone to hold your fan while working with the wires.

Besides, a helper will assist you in handling things and tools while you are doing the job on the ladder or above the ceiling.

Read the instructions completely

instructions to install ceiling fan

Instead of reading each step of how to install a ceiling fan where no fixture exists, it is more recommended to read the directions completely first before you start.

Read the manufacturer’s instructions that come with your ceiling fan as well to make sure that you do not skip any important step.

This will surely save you frustration and a loss of much time in the process.

Invest in a wire cutter

If there is no wire cutter in your toolbox, consider investing in one since it will be a necessary tool during following how to install a ceiling fan where no fixture exists.

You will have to shorten many wires from the ceiling fan to connect it to the wires.

Be prepared to drop things

Since you will be working up high on the ladder attempting to screw things, it is pretty normal if you drop your tools or other items.

Therefore, rather than being frustrated with the situation, you better take a deep breath and move forward while trying to get the job done.

Get ready for an arm workout

Before following each step on how to install a ceiling fan where no fixture exists, you should consider skipping your daily workout.

The reason is that this project will require you to hold a heavy object, stand on a ladder for a while, and try to reach up towards the ceiling. All these are indeed like a workout.

Layout all the parts

Before starting the project, you should get out everything necessary for it. Open your toolbox and lay out all the supplies in order.

Layout everything near you so that there will be no time wasted going back and forth.

Connect the wire tightly

installing ceiling fan wire

While working on how to install a ceiling fan where no fixture exists, making tight wire connections is a must. Make sure you twist your wire caps on and no wire slips away.

Turn off the power

before installing ceiling fan

When this article repeatedly recommends you to turn off the power, it does not mean you should do so to the entire house.

For your convenience, you can shut off the power to the room where you work with the project. In this view, just make sure there is no flow of electricity in the area.

Pick the right direction

How to Install a Ceiling Fan Where No Fixture Exists

You probably know how to install a ceiling fan where no fixture exists. However, do you know every feature comes with the unit?

If your unit comes with a remote, it may be capable to control its intensity, the built-in light, and the fan direction.

In this view, you should change control the fan’s direction depending on the season. For instance, in the winter, set it to spin clockwise for forcing warm air down.

The Bottom Line

bottom line of installing ceiling fan

In conclusion, installing a ceiling fan is not the simplest DIY project to do. It spends lots of time and energy to accomplish the job.

However, once you finish every step on how to install a ceiling fan where no fixture exists, the result will leave you to feel rewarded. Good luck!

Leave a Reply