If you are searching for a complete guide on how to install a utility sink next to the wash for your house, you have come to the right place.
Therefore, this page provides its readers not only the tutorials and steps but also all the things they need to know.
For homeowners, having a utility sink would be very useful in certain rooms of the house, such as the basement, garage, and washroom.
The drainage capability and the cleaning space are just what those areas need.
Furthermore, there are many other possibilities that kind of sink has to offer. Installing it next to the washing machine would require some effort.
However, you do not need local contractors for installation. Just follow this guide.
- Why Do You Need Utility Sink?
- Why Installing it Next to The Washer?
- The Needed Tools
- Step-by-Step Guide of How to Install a Utility Sink
- Dealing with the Faucet
- The Cost to Install a Utility Sink
- Types of Laundry Sink
- The Best Material for Utility Sinks
- The Difference Between Utility Sink and Kitchen Sink
Why Do You Need Utility Sink?
It begins with a simple question. Why install a utility sink? Because it can make your life easier.
Thus, having that element in a certain space at home would save water, energy, and time. You can also get a greater convenience to the wash areas.
Optimize your available space and make sure every square foot counts. Hence, a utility sink would be a great choice of the element to add in supporting that plan.
Additionally, it would be very useful in a working space like a garage and laundry room.
When you have it in the washing area, it will reduce the potential mess when prepping the clothes during laundry. So, there is no worry about a spill anymore.
Therefore, a guide on how to install a utility sink next to the wash is necessary.
Why Installing it Next to The Washer?
Having the utility sink nearby the washer would be an effective system for your laundry room. That would let you use the same water hookups as the washing machine.
Besides, it definitely saves water use during laundry. The systems would provide all of the plumbing connecting in a single area in the washing space.
Further, it would be very supportive for you who are working in a small area.
Solving Everyday Problems
Having a sink next to the washer could also save time and energy. Likewise, it is such an ideal concept for any house that is applying an energy-saving system.
Besides, everyday problems in the laundry room could be solved with this concept. Having the sink and washing machine side by side, will reduce mess.
You will not be worried about the puddling or dripping during the wash cycle anymore.
The Needed Tools
There are several required tools you need to have by your side when installing a sink. Here are some things for the installation:
- a wrench
- A pair of brass pipe splitters
- PVC Y-fitting
- A measuring stick
- PVC hand saw
- Hot and Cold Flexible tubing
- Deburring material
- Plumber’s glue
You require those tools to begin the project of how to install a utility sink next to wash.
Moreover, another essential thing is you need to have the utility tub ready. Purchasing the tools and materials online is also an option.
Step-by-Step Guide of How to Install a Utility Sink
Let us begin the project by following these steps carefully. Before that, you have to keep in mind that installing the sink next to the wash is patience and using the right tools.
At the end of the day, you will find out that the steps are fairly straightforward.
Step 1: Measuring the Drain Pipe Connection
After turning off the main water supply, start doing step 1. You cannot begin the project when the flow is still going.
Surely, everything would be a mess if you skip that. After it is off, measure the length of the drain pipe connection from the utility sink to the ground.
After getting the sink’s measurement, you need to find the drain line on the washing machine.
When you get the exact position where the line moves down into the flooring or wall, make a mark on the venting pipe.
This position is the exact area to install the new Y-fitting. It acts as the separator of the washer’s drain line from the one for the utility sink.
Moreover, those essential stages give a good flow of water for both features.
Step 2: Cutting the Existing Drain Pipe
Next, you need to cut the existing drain pipe right from the mark you made before. From the venting pipe, it will connect above the drain pipe.
During the process, cut the horizontal T-fitting too. That is the point where the water from the washing machine will dissolve turning toward and down the exit pipe of the drain.
After you are done cutting them, use the deburring tool for smoothing out the spot inside and outside.
Then, make sure it is clean and smooth so the burrs and grooves will not get in the way of seating the pipe properly. Before step 3, check the smoothness again.
Step 3: Attaching the Y-Fitting
Attaching the PVC Y-fitting would be the next step. One of the Y’s arms would go to the washing machine’s horizontal flow. Then, the top arm connects to the upper venting pipe.
The last one should go to the sink drain pipe. After all of them are attached, make sure they are tight. Use some plumber’s glue if necessary because it needs to be like that for a really long time.
Further, the recommended product should be waterproof.
The connected pipes cannot tolerate leaking because it would lead to water damage until you fix the problem. This would not be an efficient system for your laundry.
Step 4: Finding Water Sources
After the connections are settled, the next thing to do is quite similar. First, find the cold and hot water pipe connections nearby the washing machine.
They are connected in a single fiction on the water pipe. Then, one thing you need to do is to disconnect the hot and cold pipes.
If the plumbing system does not have that kind of fitting, you may find it in one long piece. Therefore, you should cut the pipe.
Before that, prepare a bucket to catch some water left. Cut it at the middle point.
However, you do not have to thread the pipe if it is not necessary. While needed, acquire a threading tool to complete the steps.
Step 5: Adding the Pipe Splitter
The two-headed pipe splitter you have already prepared, attach it onto the main water with screws. Have it for both cold and hotlines.
Do not forget to screw them all tightly. The purpose of using a splitter is to separate the water supply based on the temperature.
One of them would go to the wash and the other goes to the utility sink. It is crucial to connect the splitter to cold and hot pipes.
After they are all secured, make sure to reconnect the wash with the piping you already have.
Otherwise, you can get the new ones if you want. Once again, ensure the security of the connections you have already made. Use pliers or a wrench for that.
Step 6: Connecting the Hoses
This one is one of the final steps of how to install a utility sink next to wash. Take the tubing. The length should be enough to reach the sink.
Connect it to the sink’s line right from the pipe splitter. The blue one for cold and the red one for the hot for easy identification.
After making sure of the secured connection, turn on the water supply. Check the water flow whether it runs smoothly or not.
What about the leak? Ensure this problem is not present. If there are some issues, turn it off again and deal with the leaking connection and tight them up more.
Dealing with the Faucet
After you have done all of the processes, it is time to assemble the utility sink faucet. The main water supply should be off before beginning the step. This stage would prevent flooding.
To assemble the faucet, you need to prepare a few tools to get the process going well.
- A Wrench
- Nuts and Washers
- Foam or Rubber Gaskets
- Plumber’s Putty and Knife
The Steps of Assembling the Faucet
To install the faucet properly, follow these steps:
1. Mounting the Faucet
The first thing to do is mounting the sink faucet. You need to use gaskets and putty or one of them. Slide the faucet to the pre-drilled hole from the top.
Most faucets on the market would have nuts and rubber gaskets to make the installation well-secured into the sink. However, you may need to use putty to make it tighter.
2. Tightening the Mounting Nuts
This step will require you to make the mounting nuts tighter to secure the faucet to the sink. Wrench it from underneath the sink tightly.
Some people might find issues during these steps. Sometimes, it causes the excess sealant to go out of the side.
Deal with it by using a putty knife or a damp towel while the mounting nuts are still sticky.
3. Threading the Water Lines
Next, you need to thread the cold and hot water lines. Gather the ends and affix them to the matching feature underside the faucet.
You do not need pliers or a wrench to do this. However, the tools will make sure everything is well-sealed.
4. Check for Leaking
The final step for the guide of how to install a utility sink next to the wash is to check for the leak. After the faucet is done, just turn on the water supply and examine the leaking problems.
If you see some, check if there are any loose connections. Do not forget to use a flashlight to light up your sight under the sink.
The Cost to Install a Utility Sink
Installing a utility sink for a laundry room would be based on the quality and type of sink you have. So, choose the one that suits your budget.
If you want to get the sink that is made of fiberglass or vinyl, it would cost around 50 to 100 bucks. For the fancy stainless steel ones, it would be about 175 to 500 dollars.
Moreover, you might explore other options. Some of them have a wall mounting feature, cabinets, and many more.
For the installation, there are two options. The first one is to hire professional plumbers to install it for you.
The cost is about 200 dollars but it costs lower or higher depending on the company’s policy.
Meanwhile, another option is to deal with it by yourself. You can save on labor costs effectively.
This choice is good for those who have experience in plumbing. However, those steps above would make you succeed in this DIY project although you do not have the skills.
Types of Laundry Sink
After knowing all the steps of how to install a utility sink next to wash, people might get confused about getting the right types of sinks for the laundry room. Here are some of them you need to know.
1. Freestanding Sinks
It is also known as a floor-mounted sink which has its own legs. Connect this item to the basin or separated.
This is the most basic and inexpensive sink you could choose for the laundry room. The price range would go about 80 to 200 dollars.
The basin’s depth is about 24 inches. Interestingly, this installation is much easier than the others.
Furthermore, you should attach the sink to the plumbing lines and secure it to the wall.
2. Wall-Mounted Sinks
This type of sink would attach directly to the wall. Because of the weight, it needs to be attached right behind the wall studs.
When you have limited space in the laundry room, this wall-mounted feature is the best choice.
3. Base Cabinet-Mounted Sinks
It is a combination of a utility sink and a bathroom vanity cabinet. Also, it comes with storage on the bottom with doors.
This is the best option for the space to maintain the appearance. All the things can be hidden behind the cabinet which includes the cleaning items.
4. Undermount Sinks
It is also known as drop-in sinks. For a laundry room with a countertop, this one is an option to go with.
Then, it would be mounted on the base cabinets. The sink is inserted into the large holes cut on the counter. This under-mount feature will aesthetically blend into the laundry room.
5. Apron-Front Sink
It is another type of sink that you may often find in the kitchen. This style is designed for country-style space.
Besides, it would work well in the laundry room too. The apron feature would deflect water splashes on you.
6. Agitator Utility Sink
This one is quite sophisticated. Some homeowners actually need it to wash some items that are probably too small for the cycle or washer.
A quick swish with detergent in the agitator sink would be best for the items. There is a laundry sink that works like a whirlpool tub available on the market.
The Best Material for Utility Sinks
After choosing the best sink types for your laundry room, consider the suitable material. It can be based on personal tastes.
1. Stainless Steel
When thinking about the sink, stainless steel is one of the popular materials. Homeowners like this material because it will not stain, chip, or fade.
Also, it provides the interior scene with the fancy look of steel.
2. Solid Surfacing
This material has a warm appearance that may support a specific room’s style. The quality of solid surfacing is great for a wide variety of tasks.
You can get rid of scratches and dings right away by sanding them out. The laundry room and bathroom seem to be the best place for this material.
3. Enameled Cast Iron
It is one of the popular choices for sink material. The enamel cast iron is the strongest on this list. There will be no chipping, scratching, and staining.
However, this material could not handle the exposure to harsh bleach. It makes the enamel blemished.
The enamel material covers the entire iron surface to give a warmer look. This sink is very heavy. So, you have to make sure that the supporting structure is strong enough to carry it.
Besides, it can chip and crack when getting bumped with something hard.
The Difference Between Utility Sink and Kitchen Sink
A utility sink in a washroom is also known as a laundry tub.
So, what is the difference between a laundry tub and a kitchen sink? Mainly, it is in the thickness of the material and design quality.
Most types of utility sinks are not designed for the kitchen. It is because of the material quality. Many laundry tubs are made of cheap thin steel.
Meanwhile, sinks used in the kitchen are thick and sturdy. The quality needs to be perfect for cooking activities.
Some kitchen sinks should not be used in the laundry room. For example, a washroom would be looking odd with a double bowl sink. Use the large single bowl instead.
At the end of the day, knowing how to install a utility sink next to wash would be very important. The guides and all information provided in this article are so helpful and inspiring. Let us get to work.